With the rapid development of industrialization, the issue of mechanical safety production is becoming increasingly prominent. Especially in the production areas of some large factories, there are numerous mechanical equipment and complex operations, making safety production management difficult. For example, in the production workshop of a textile factory, where production equipment continues to operate and the factory environment is harsh, how to improve production efficiency and ensure production safety is a challenge for modern chemical plants.

Application Challenge: Stable Monitoring of Factory Environment

The harsh environment of factories, such as high noise, high temperature, and dust, requires testing equipment to have precise temperature control systems and reliable sealing designs. At the same time, in order to ensure production efficiency, monitoring equipment should be able to operate stably.

Solution

The ILS-F20 safety LiDAR adopts the Time of Flight (TOF) ranging principle and can achieve area protection within a 270 ° field of view angle and a maximum distance of 8 meters (with a reflectivity of 2%).

Production machinery related equipment emits laser pulse waves through laser emission devices, and the system starts timing calculations. When the laser touches an object, some energy returns, and the laser receiving device receives the returned laser wave. At this time, the distance between the laser scanning sensor and the measured object is calculated by the system. Obtain the required data through relevant algorithms and transmit it to the control system to assist in the safe production of machinery in the area.

The ILS-F20 safe LiDAR is adaptable to a wide range of environments and has strong anti-interference capabilities. The precise temperature control system and reliable sealing design enable it to maintain stable working conditions even in harsh weather conditions such as rain, fog, snow, ice, frost, and high and low temperature environments. Accurate, efficient, reliable, and durable, it provides protection for production safety and has gained high recognition from users.

Practical cases

We have adopted the Laser Eyes F20 safety type LiDAR on the textile machinery equipment of Tongkun Group. The laser scanning is precise and efficient, ensuring the safety and stability of regional production. Obtaining high recognition from users is a must-have product for repeat purchases.

F20 Safety Lidar Characteristics

Laser protection level 1, eye safety;

Large field of view, long-distance, high-speed, and precise measurement;

Industrial level safety protection, flexible area setting;

Accurate temperature control design, working temperature range -10 ℃~+50 ℃;

Reliable and enclosed design, with a protection level of IP67;

Safety protection in complex environments, applicable both indoors and outdoors;